 |
|
MIXERS
|
 |
MF SERIE
The walls and bottom of the mixing vat are made of antiabrasive screwable steel plates. The arms of the blades are changeable, selfregulated, easily available and protected agains dust. They are also monted in an articulated way on hard rubber silenblock to cushion the joinings.
The blades are made of NI-HARD smelted abrasion resistant blades.
The circular discharge door at the bottom is made of welded steel mechanized and assembled on rollers allowing smooth functioning with no strain whatsoever. The control can be manual or automatic by pneumatic or hydraulic powered system. It may have from one to three unloadind gates. The mixer is completely careened with a detachable cover provided with a register trapdoor. The engine is within reach on the outside of the mixer.
MH SERIE
THE HORIZONTAL AXIS MIXER is comprised of a cylindrical mixing vat, equipped with two spiral beating arms, with NI-HARD smelted blades and abrasion resistant and changeable bottom and sides, as well as cleaning rings and lateral wiper seals.
| MODEL |
Capacity in litres |
Mixing production m³ |
Power |
Skip's power |
| MF-500 |
500 |
0.35 |
25cv |
5.5cv |
| MF-750 |
750 |
0.5 |
30cv |
7.5cv |
| MF-1125 |
1.125 |
0,75 |
40cv |
10cv |
| MF-1500 |
1.500 |
1,0 |
50cv |
15cv |
| MF-1875 |
1.875 |
1,25 |
60cv |
20cv |
| MF-2250 |
2.250 |
1,5 |
75cv |
2x10cv |
| MF-3000 |
3.000 |
2,0 |
100cv |
2x15cv | |
|
|
Print